Differences

This shows you the differences between two versions of the page.

--- meshtastic:nano [2022/09/24 10:41] – [Setting TX Power to 20 dBm] neilhao
+++ meshtastic:nano [2023/02/19 21:11] (current) – [Meshtastic Mesh Device Nano Edition] neilhao
@@ Line 5: / Line 5: @@
 Starts from 2022/Mar/16 to ~~LASTMOD~~ (Last Modification)
-^:!: Order Yours Today^^^
+**Nano G1 had been upgraded to Nano G1 Explorer, the old model has been discontinued. Nano G1 Explorer features a new internal wideband Lora antenna that supports frequencies from 815 Mhz to 940 Mhz. A wideband antenna combined with an optimized wideband LoRa RF front-end circuit allows the Nano G1 Explorer to work with LoRa bands in most regions of the world without changing the antenna. The device has also been designed taking into account the potential impact of the human body on its antenna performance, ensuring optimal RF performance even when carried in a pocket. **
-|Official Store| [[https://shop.uniteng.com/product/meshtastic-mesh-device-nano-edition/|https://shop.uniteng.com]]|**In Stock**|
-|Tindie | [[https://www.tindie.com/products/neilhao/meshtastic-mesh-device-nano-edition/|https://www.tindie.com]]   | **In Stock**|
+**More information about the new model: https://wiki.uniteng.com/en/meshtastic/nano-g1-explorer**
-:?: [[https://uniteng.com/wiki/doku.php?id=meshtastic:overview|Edition Comparisons between our Meshtastic Products]]
+:?: [[https://wiki.uniteng.com/en/meshtastic|Edition Comparisons between our Meshtastic Products]]
 ===== Overview =====
 {{ :meshtastic:meshtastic_mesh_device_nano_edition_overview.jpg?nolink&400|}}
@@ Line 157: / Line 158: @@
 The Fimware may also be updated by using [[https://github.com/meshtastic/Meshtastic-gui-installer|Meshtastic GUI Installer]]. Meshtastic GUI Installer is a cross platform, easy to use GUI for installing Meshtastic firmware.
-More Information about the official firmware support: https://meshtastic.org/docs/hardware/supported/nano-g1
+More Information about the official firmware support: https://meshtastic.org/docs/hardware/devices/nano-g1/
 ===== Firmware Less Than Or Equal To Meshtastic 1.2.59 =====
 For the old firmwares less than or equal to Meshtastic 1.2.59, Meshtastic firmware[1] can be ported to this design with minor modification. __Unless there are special reasons, it is not recommended to use old firmwares, these firmwares may not be compatible with the latest version of mobile APP or other PC softwares.__
@@ Line 194: / Line 195: @@
 ==== iOS ====
 The iOS APP could be downloaded and installed from following URL:
-https://meshtastic.org/docs/software/apple
+https://meshtastic.org/docs/category/apple-apps
 ==== JS/Python/Web Interface ====
 Javascript, Python, Web Interface are also supported by the Meshtastic. More information:
@@ Line 202: / Line 203: @@
 ==== Setting TX Power to 20 dBm ====
-===For Meshtastic Firmware 1.3.x===
+===For Meshtastic Firmware 2.x.x===
-Execute following command by using [[https://meshtastic.org/docs/software/python-cli|Meshtastic CLI]] which supports Firmware 1.3.x:
+Execute following command by using [[https://meshtastic.org/docs/software/python/cli|Meshtastic CLI]] which supports Firmware 2.x.x:
 	meshtastic --set lora.tx_power 20
 Output:
@@ Line 211: / Line 212: @@
 ===For Meshtastic Firmware 1.2.x===
-Execute following command by using [[https://github.com/meshtastic/Meshtastic-python/releases/tag/1.2.90|Meshtastic CLI 1.2.90]] which supports Firmware 1.2.x:
+Execute following command by using [[https://github.com/meshtastic/Meshtastic-python/releases/tag/1.2.95|Meshtastic CLI 1.2.95]] which supports Firmware 1.2.x:
 	meshtastic --ch-set tx_power 20 --ch-index 0
 Output:
@@ Line 219: / Line 220: @@
 ==== Enabling ext_notification_plugin ====
-===For Meshtastic Firmware 1.3.x===
+===For Meshtastic Firmware 2.x.x===
 You will be alerted by the Active Buzzer when receiving an incoming message.